Professional dry heat sterilizer for tools 9L

Professional dry heat sterilizer suitable for metal tools, glass tools, nail files, rasps and other instruments suitable for dry heat sterilization. It features an adjustable thermostat with temperature settings from 80°C to 180°C and a mechanical timer of up to 60 minutes, with an audible signal at the end of the cycle.

Its construction combines a metal exterior with an electrostatic paint finish and an interior made of galvanized sheet metal. It includes a rack and two trays for placing the tools.

Features

• Capacity: 9 liters
• Power: 900W
• Maximum temperature: 180°C
• Thermostat settings: LOW (80°C) – HIGH (180°C)
• Mechanical wind-up timer: 0–60 minutes, with an audible signal at the end of the cycle
• Three heating elements with a total power of 900W: one central 400W element and two 250W elements, positioned at the top and bottom
• Weight: 3.6 kg

Dimensions

External: 23.5 × 26.1 × 31.6 cm

Internal: 20.6 × 19.6 × 29.4 cm

Heating element operation

The sterilizer features three heating elements that work together to provide a total power output of 900W. The central 400W element is the one that appears more visibly illuminated during operation, while the two supplementary 250W elements operate at a lower intensity and may appear to be switched off. This does not necessarily mean that they are not functioning. According to the manufacturer's specifications, the heating elements are connected in series, meaning that if one element burns out, the sterilizer stops operating.

Preparation before use

• Place the sterilizer on a flat, stable surface
• Leave 10–15 cm of free space around the unit to ensure adequate ventilation
• The sterilizer must not be built into cabinetry or enclosed
• Before sterilization, tools must be washed, completely dry and free from blood or other foreign substances

How to use

1. Place the clean, dry tools on the tray, leaving space between them and avoiding stacking them on top of one another
2. Close the sterilizer door
3. Set the thermostat to the desired temperature. For operation at 180°C, select HIGH
4. Set the timer to the desired duration, up to 60 minutes. For the procedure described in the manufacturer's instructions, select 60 minutes
5. Turning the timer starts the sterilizer
6. When the set time has elapsed, an audible signal sounds and the sterilizer switches off
7. Allow the tools to cool before removing them. For faster cooling, you can open the door
8. If permitted by the instructions for the specific tools and sterilization pouches, you can place them in commercially available sterilization pouches

Warnings

• During the first use, the sterilizer must be operated empty, without tools. Smoke or a burnt-oil smell may occur. Allow the unit to complete the entire operating cycle
• Do not touch the sterilizer during operation, as its external surfaces become very hot
• Cleaning and maintenance must only be carried out when the sterilizer is disconnected from the power supply
• Unplug the appliance when not in use
• If you notice any problem with the operation of the sterilizer, stop using it immediately