Hair dye Magirel 50 ml No10.1

LOreal Professionnel Majirel 50ml hair dye

Majirel professional paint offers rich, shiny, uniform color, with long duration and 100% white coverage.


PERFORMANCES:

Permanent oxidative dye, which treats the hair as a whole, thanks to the active protective elements: Ionene G and Incell.
100% coverage on white hair.
Result with long duration and accuracy, with vivid and bright color.


INSTRUCTIONS FOR USE:

Wear suitable disposable gloves.
Do not use metal tools (tweezers, bowls, etc.).
Use only Oxydant oxidizing creams, up to 30 degrees (9%).
Observe the recommended proportions.
You can prepare the mixture in a shaker or in a bowl.
Mix until a thick cream forms.
If you use a shaker, open the lid immediately after mixing to prevent the product from splashing.
Apply plenty of mixture to the roots, to completely cover the white hair.
During the residence time, the mixture changes color.
This phenomenon has no effect on the effect of the paint.


3 BASIC RULES

1. Mixture: 1 + 1.5

Majirel dye is used in mixing 1 tube of 50ml, with 75ml oxidizing cream Oxydant 20 degrees (6%), for opening 2 tons.
To open 3 tones, use Oxydant 30 degree oxidizing cream (9%).

2. Apply and rinse to preserve color

Apply the mixture with a brush to dry and unruly hair.
Start the application from the roots.
Total residence time of the paint: 35 minutes.
Apply to the lengths and edges (always adding a small amount of lukewarm water, about 5ml to the rest of the mixture).
If the color on the lengths and edges is slightly distorted (well-preserved color), apply to the lengths and edges 5 minutes before the end of the residence time.
If the color on the lengths and edges is moderately distorted (faded refills), apply after 20 minutes of residence time and leave for 15 minutes.
If the color on the lengths and edges is very distorted (loss of refill up to 1 tone lighter), apply immediately.
After the residence time, make a careful emulsification.
Rinse hair thoroughly until water is clean.
Wash your hair with shampoo, especially for dyed hair.

3. Coverage

Majirel covers 100% of white hair.
0% - 50% white hair: apply the color you want.
50% - 100% white hair: mix the color you want 1/2 + 1/2 with a basic shade or a basic dore shade (.3) or a basic natural dore shade (.03) Majirel tone level and oxidizing cream 20 points (6%).


3 EXCEPTION POINTS

1. First dye or fast root emergence

Start the application from the lengths and edges.
Leave a stay of 15 minutes.
Then apply to the roots and leave for 35 minutes.

2. Faded or very light lengths and edges or with a tendency to discard the color

Up to 1 ton difference between the remaining shade in lengths and edges and the desired shade, follow Basic Rule # 2.
2 to 3 tones difference between the remaining shade in the lengths and edges and the shade you want, enhance the color.
Apply the shade you want to the roots.
Add 3 to 6 cm of warm tones or darker Majirel tones to the remaining mixture and a small amount of lukewarm water.
Apply to lengths and edges.
Massage.
Leave a stay of 35 minutes.

3. Too dark or too loaded lengths and edges

To eliminate a tint or erase an incompatible tint, up to 1 tone difference between the tint remaining at the lengths and edges and the tint you want, erase using Efassor with water.
To clean a darker shade and be able to use a lighter shade, over 1 ton difference between the remaining shade in the lengths and edges and the shade you want, clean using Efassor with 20 degree Oxydant oxidizing cream (6%) or 30 points (9%).


L΄Oréal Professionnel develops innovative products designed with the utmost respect for hair.